13. The printer keeps beeping or flashing

1.The printer will beep or flash 3times in a row when it is ON without labels. Please open the printer cover and load the label paper extends to the printer outlet so that it can be detected. If the printer fails to detect the label paper, it will blink three times in a row.  

2. Ensure that the printer cover is securely closed. If you have loaded the label paper into the printer, closed it properly, and it is still beeping or flashing 6times, please turn it off and re load the label paper and turn it on, see if it stops?

3. If you have loaded the label paper in printer correctly and it still flashes three times in a row and you are using the BT320 Printer or BT620 Printer, please follow these steps to set it up:

1)Remove the label paper from the printer and turn the power on, let it keep beeping or flashing.

2)Open the "Rekdom Printer" app - tap printer icon, choose Bluetooth, find and tap the BT320 Printer to connect. Then long-press the "Rekdom Printer" title for about 6 seconds to transfer to the settings page - Calibration Settings - Lack Paper Learn - Tap Learn. After that, load the label paper into the printer and see if it stops beeping or flasing.